|
|
 |
Sell: RTV-2 Mould Making Silicone Rubber for soap molds |
| Date: |
2014-05-29 |
| Cas#: |
39100000 |
| Specification: |
638#,728#,788# silicone rubber |
| Price: |
|
| Quantity: |
100000Kilogram |
| Term: |
3 |
| Note: |
Specifications
Silicon features:1) For soaps mold making.2) high tensile, tear-strength.etc.3) low shrinkage 4) non-deformation4) free catalyst
Sell RTV-2 Mould Making Silicone Rubber for soap molds
Silicon rubber for soap mold making applications
Silicon rubber for molding making is primarily intended for poly resin crafts,PU crafts,PU resin crafts ,gypsum crafts ,unsaturated resin crafts, lighting and candles crafts ,plastic toy , stationery gifts crafts industry, a large statue Buddha, relievo furniture, furniture decorative materials, statues Buddha, artifacts copied, building decoration materials, large-scale cement mold, artificial fossils Factory,Europe component factory, simulation landscapes, animals and plants sculpture, sandstone crafts and so on.
Silicon rubber for mold making features
Silicon rubber for mold making is white or red flowing liquid with general hardness of 22-50A脗掳after curing. Molding silicon rubber is a kind elastic silicon rubber mold which features with resistance to deformation, high-temperature, acid-alkali and expansion as well as high reproduction times, good tensile strength ,tear strength and elongation.
Silicon rubber for mold making operations
If the customer wants to make large products and large size molds, the mold should be made of silicon rubber with high hardness. On the contrary, if the mold with fine and precision patterns, it should be made of silicon with low hardness. The amount of the curing agent depends on the actual requirements of the customer. If molds requiring fast drying and demould, more curing agent is needed; contrarily, if molds requiring slower drying and demould, less curing agent is needed.
(Note: our company does not recommend you to add silicone oil. If a special soft silicon mold or fine detailed and complex patterns products are required, 5%-10% silicone oil can be added to soften the mold for easy demould.)
Frequently asked questions of moulding silicone rubber
Why does the addition cure molding silicone rubber cures after a long time?
In spite of the correct proportion of the curing agent and the silicone rubber, the mold silicone rubber needs a quite long period for curing at the room temperature, because it is can be completely cured by heating up the temperature and stressing.
The general proportion of silicone rubber and curing agent is 10:1 and their reactions are as follows:
The silicone rubber will be cured in 6 hours at the temperature of 50.
The silicone rubber will be cured in 2-3 hours at the temperature of 80.
The silicone rubber will be cured in 30 minutes at the temperature of 100.
The silicone rubber will be cured in 15 seconds at the temperature of 200 |
|
|
