|
|
供应 暂堵剂 /26062-79-3  |
规 格： |
25千克 |
价 格： |
6670/元/吨 |
数 量： |
10000 吨 |
交货地： |
河南濮阳 |
发布时间： |
2019-12-17 |
有效期： |
255天 |
备 注： |
在石油钻井和开发中，从钻开油气层到完井、固井、射孔、酸化、修正、压井、洗井、等各个环节，由于液体和固体的颗粒的浸入都不同程度的对油气层造成损害和污染。暂堵技术是避免各种入井流体浸入油气层的重要措施之一，保护油气层效果明显。
TBD系列暂堵剂，是以重质不饱和烃树脂为主要原料，经特殊的合成和加工工艺制成的油层保护剂新产品。具有油溶性好、暂堵率高、封堵强度大、解堵率高、适用性广、成本低廉、施工简单等优点，可适用于钻井液、完井液、修井液、压井液、洗井液等多种入井液体的暂堵，防止入井流体浸入，保护油气层。该产品是在我公司承担的国家"九五"攻关计划项目——重质不饱和烃聚合物暂堵剂在油田中的应用基础上研制开发的，项目产品填补国内油溶性暂堵剂的产品空白，达到国外产品同期水平。
一、 基本原理
以重质不饱和烃树脂，油溶性聚合物、表面活性剂等为主要原料的TBD系列暂堵剂，含有架桥粒子、充填粒子及变形粒子，具有不同粒度级配的TBD水基悬浮液，可在地层孔喉处吸附架桥、充填形成一条渗透率相对较低且具有一定强度的暂堵带，阻止入井流体进入油气层，开井生产时可被原油逐渐溶解、分散，从而达到暂堵、防漏和保护油气层的目的。
二、 主要技术指标
1、 油溶率≥95%
2、 暂堵率≥95%
3、 解堵率≥90%
4、 使用地层温度40-120°C;
5、 使用地层渗透率0.01-15μ㎡;
三、 使用方法
1、 TBD-1型（液剂）：用油井作业入井流体的暂堵保护剂。将其配成2-3%（加水稀释10倍）的水基悬浮液，充分搅拌均匀，可在作业前单独注入地层实施暂堵保护，也可在入井流体中加入实施暂堵保护，待压力稳定后，再进行后续修井作业，每米地层用量3-10方；用作酸化转向剂时，先将其用水稀释成3-5%的水基悬浮液，用泵压注入底层，然后再进行酸化，每米地层用量3-5方。
2、 TBD-II型（粉剂）：用作钻井液暂堵保护剂，可在打开油气层后，直接加入到钻井液完井液中， 加量为2-3%。用作采油作业入井流体暂堵和酸化暂堵时，需预先配置0.3%的聚丙烯酰胺水溶液,然后加入2-3%的TBD-II粉剂,充分搅拌均匀后使用,每米地层用量3-10方
In oil drilling and development, oil and gas from drilling to completion, cementing, perforation, acidification, correction, killing, washing, and other links, as the liquid and solid particles in different degree of reservoir damage and pollution. Shielding temporary plugging technique is to avoid a variety of well fluid into the reservoir is one of important measures, reservoir protection effect is obvious.
TBD series of shielding and temporary blocking agent, is a heavy unsaturated hydrocarbon resin as the main raw material, after special synthesis and processing technology of reservoir protection agent of new products made from. Oil soluble temporary plugging with good, high rate, sealing strength, blocking rate is high, wide applicability, low cost, simple cuction and other advantages, can be used for drilling fluid, completion fluid, workover fluid, killing fluid, flushing fluid into the well liquid and other temporary plugging, preventing the drilling fluids immersion, reservoir protection. The product is in my company of the state" Nine Five" project -- heavy unsaturated hydrocarbon polymer plugging agent in oil field based on the application of research and development, project products to fill the domestic oil soluble temporary plugging agent products blank, reached the same level of foreign products.
One, basic principle
Heavy unsaturated hydrocarbon resin, oil soluble polymer, surface active agent as the main raw materials such as TBD series of shielding temporary plugging agent, with bridging particles, filling particles and deformation of particles with different particle size distribution, the TBD water-based suspensi, can be adsorbed in formation pore throat bridging office, filling and form a relatively low penetration rate and with a certain strength plugging band, stop into the well fluid into the reservoir, well production of crude oil can be gradually dissolved, dispersed, so as to achieve temporary plugging, sealing and reservoir protection purposes.
In two, the main technical indicators
In 1, oil solution ratio > 95%
In 2, temporary plugging rate > 95%
In 3, the plugging removal rate is greater than or equal to 90%
4, the use of 40-120 C formation temperature;
5, the use of 0.01-15 / square meters of permeability;
Three, the use of methods
In 1, TBD-1 ( liquid ): used in oil well operation into the well fluid and temporary plugging agent. The match 2-3% ( diluted with water 10 times) aqueous suspensi, fully mixing evenly, can be injected into the formation before operation to separate implementation of temporary blocking protection, can also be found in the well fluid is added in the implementation of temporary blocking protection, the pressure to be stable, and then follow-up workover, each meter formation was 3-10; as the acidified diverting agent, first be diluted into 3-5% water-based suspensi with a pump pressure injection, bottom, then acidification, dosage of 3-5 per meter formation.
In 2, TBD-II ( powder ): used in drilling fluid plugging agent, an open reservoir, directly added to the drilling fluid and completion fluid, plus the amount of 2-3%. As oil production well fluid and temporary plugging and acidizing plugging, need of configuring 0.3% polyacrylamide aqueous solution, and then joined the 2-3% TBD-II powder, stirring, dosage of 3-10 per meter formation
郑召国
河南省铭泰化工有限公司
电话：0393-2216206
手机：13700803703
传真：0393-2216206
邮箱： hnmingtai@163.com
地址：河南省濮阳市台前县铭泰工业区 |
结构式： |
 |
|
|
